12V 820W All-in-One 3072Wh Storage M1 Photovoltaic Kit to power Camper Boat

12V 820W All-in-One 3072Wh Storage M1 Photovoltaic Kit to power Camper Boat

M1 12V 820W Photovoltaic Kit complete with two 410W photovoltaic module, SmartSolar MPPT 150/70 70A Solar Charge Controller Victron Energy, Topsolar LiFePO4 Lithium Battery 12V 240Ah with a BMS charge management and monitoring system, Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated, Victron Energy Blue Smart Series Battery Charger 12V 15A 1 output IP22 and Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors for stand-alone PV systems, remote houses, camper vans, boats, industrial applications, lighting systems, road signs, TVCC systems and much more.
The kit is made by:
2 - 410W monocrystalline silicon photovoltaic panels #N151030050303-8;
1 - Victron Energy SmartSolar MPPT 150/70-Tr 70A Solar Charge Controller #OF012090;
1 - Topsolar LiFePO4 Lithium Battery 12V 240Ah with BMS #N51120050955;
1 - Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated #UF23149S;
1 - Victron Energy Blue Smart Series Battery Charger 12V 15A 1 output IP22 #N52421020520;
1 - Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors #N151230750281.

n°2 - 410W monocrystalline silicon photovoltaic panels

The 410W solar module is a high-efficiency black-white frame monocrystalline solar module with half-cut technologies, which consists of halving the cells. Efficiency of up to 21.3% thanks to superior cell technology and cutting-edge production methods. This technology reduces thermal resistance and increases power output by 5 to 10 Wp. Self-cleaning glass. Powerful module with low irradiance even in low light conditions (morning or cloudy).
• High efficiency monocrystalline technology
• Low current density technology to effectively reduce internal power consumption.
• MBB and HC technology to reduce negative affect from yielding caused by micro cracks and shadows.
• High power output leads to lower BOS cost.
Global, Tier 1 bankable brand, with independently certified state-of-the-art automated manufacturing. Industry leading lowest thermal coefficient of power. Industry leading 12 years product warranty. Excellent low irradiance performance. Excellent PID resistance. Dual stage 100% EL inspection warranting defect-free product. Module Imp binning radically reduces stringmismatch losses. Excellent wind load 2400Pa and snow load 5400Pa under certain installation method.
Specification:
Model: RSM120-8-410M-B-TW;
Nominal Power: 410 W;
Cell Type: Monocrystalline;
Number of cells in series: 120 (5x12+5x12);
Open-circuit Voltage (Voc): 41.90 V;
Maximum Power Voltage (Vmp): 34.89 V;
Short-circuit Current (Isc): 12.47 A;
Maximum Power Current (Imp): 11.76 A;
Max System Voltage: 1500 V DC;
Module Efficiency: 21.3 %;
Frame: anodizedaluminium alloy;
Dimension: 1754x1096x30 mm;
Weight: 21 kg.

n°1 - Victron Energy SmartSolar MPPT 150/70-Tr 70A Solar Charge Controller

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98 %.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth.
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

Technical Specifications:
- Nominal battery voltage: 12/24/48 VAuto select (36 V: manual);
- Rated charging current: 70A;
- Nominal PV power, 12 V 1a,b): 1000 W;
- Nominal PV power, 24 V 1a,b): 2000 W;
- Nominal PV power, 36 V 1a,b): 3000 W;
- Nominal PV power, 48 V 1a,b): 4000 W;
- Max PV 2 short-circuit current: 50 A (max 30 A for MC4 conn.);
- Max open circuit PV voltage: 150 V at minimum temperature conditions/145 V max. during start-up and operation;
- Efficiency at full load: 98%;
- Self-consumption: Less than 35 mA @ 12 V / 20 mA @ 48 V;
- Charging voltage - absorption: Default: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable via: rotary switch, display, VE.Direct or Bluetooth);
- Charging - maintenance voltage: Default: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable via: rotary switch, display, VE.Direct or Bluetooth);
- Charging voltage - equalization: Default: 16.2V / 32.4V / 48.6V / 64.8V (adjustable);
- Charging algorithm: multi-step adaptive (eight programmed algorithms) or user-defined algorithm;
- Temperature compensation: -16 mV / -32 mV / -64 mV / °C;
- Protection: PV Reverse Polarity / Output Short Circuit / Over Temperature;
- Operating temperature: -30 to +60°C (maximum rated output up to 40°C);
- Humidity: 95%, non-condensing;
- Maximum height: 5000 m (maximum rated output up to 2000 m);
- Color: Blue (RAL 5012);
- PV terminals: 35 mm² / AWG2 (Tr models) Two pairs of MC4 connectors (MC4 models);
- Battery terminals: 35 mm² / AWG2;
- Protection category: IP 43 (electronic components), IP22 (connection area);
- Weight: 3kg;
- Dimensions: 185x250x95 mm;
- Safety: EN/IEC 62109-1, UL 1741, CSA C22.2.

n°1 - Topsolar LiFePO4 Lithium Battery 12V 240Ah with BMS

The Smart BMS LiFePO4 battery is definitely the best alternative to 12V lead-acid batteries because they have a stable supply voltage even under heavy load. Offering the advantages of lithium: light weight, stable voltage, high cycle count. It can directly store more than 96% of the supplied energy. High performance even in extreme conditions. Deep and constant discharge and recharge efficiency.
The battery charge monitoring system (commonly called Battery Management System or BMS) allows intelligent management of the range and safety of an e-mobility vehicle, in turn reducing power costs. The BMS manages the entire array of lithium cells (single cells or entire battery packs), establishing a safe operating area, i.e. a safety area within which the battery pack guarantees the best technical and energy performance. The BMS is basically an electronic system for the complete control of all the diagnostic and safety functions for the management of the voltage on board the vehicle and the balancing of the electric charge.
The fields of application of lithium batteries are diverse, especially for stationary or mobile use. In particular, mobile homes, solar boats, electric boats, electric scooters, golf cars or even electromobiles/wheelchairs and cleaning machines are increasingly equipped.
Series and parallel connection for 24V, 48V and 96V applications.

Electrical performance:
Nominal Voltage: 12.8V
Nominal Capacity: 240Ah
Capacity @ 20A: 600 minutes
Energy: 3072 Wh
Auto Discharge: <3% / Month
Cells: 3.2V Prismatic Cell
Life Cycle: >4000
Application: 12V installation, 4Pcs parallel, 4Pcs max series connection (12-24-48V)
Exhaust performance:
Reconnect Voltage: >10V
Low Voltage Disconnect Recommended: 10V
Discharge Breakdown Voltage: >10V (50 ~ 150ms)
Charging performance:
Operating voltage range: 11.2V ~ 14.6V ± 0.2V
Maximum charge current: 120A
Continuous discharge current: 100A
Maximum discharge current: 200A
Temperature performance:
Charging temperature: 0 to 45℃
Discharge temperature: -20 to 60℃
Storage temperature: 0 to 45℃
Mechanical performance:
Terminal Type: M8
Terminal Torque: 80 ~ 100 in-lbs (9 ~ 11 N-m)
Case Material: ABS
Enclosure Protection: IP65
Dimensions (L x W x H): 520x238x230 mm
Weight approx. 23 kg
Compliance:
Guarantee: European, as per the regulation in force on the date of sale.

n°1 - Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated

The Orion-Tr Smart DC-DC charger isolated is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
The Orion-Tr Smart charger is suitable for both lead acid and lithium batteries. This model is 360W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
• For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
• For lithium batteries absorption time is fixed, default 2 hours.
• Alternatively, a fixed output voltage can be chosen.
Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
High temperature protected The output current will reduce at high ambient temperature.
IP43 protection When installed with the screw terminals oriented downwards.
Screw terminals No special tools needed for installation.
Input fuse (not replaceable)
Features:
Model: Orion-Tr SMART 12/12-30 Isolated;
Input voltage range(1): 10-17V;
Under-Voltage Shutdown: 7V;
Under voltage restart: 7.5V;
Rated output voltage: 12.2V;
Output voltage regulation range: 10-15V;
Output voltage tolerance: +/- 0.2V;
Output Noise: 2mV rms;
continuous current output at nominal output voltage and 40 ºC: 30 A;
Maximum output current (10 sec.) at nominal output voltage minus 20 %: 40 A;
Short circuit output current 60A;
Continuous power output at 25ºC: 430W;
Continuous output power at 40ºC: 360W;
Efficiency: 87%;
Without load current at the load input: < 80 mA;
Standby current < 1mA;
Galvanic Isolation: 200 VDC between input, output and case;
Operating temperature range: -20 to +55 ºC (3 % reduction per °C above 40 °C);
Humidity: Max. 95% non-condensing;
DC connection: Screw terminals;
Maximum cable cross section: 16 mm² (AWG6);
Weight: 1.8kg (3lbs);
Dimensions HxWxD: 130x186x70 mm (5.1 x 7.3 x 4.0 inches);
Protection category: IP43 (electronic components), IP22 (connection area);
Standards: EN 60950, EN 61000-6-3, EN 55014-1, EN 61000-6-2, EN 61000-6-1, EN 55014-2, ECE R10-5.

n°1 - Victron Energy Blue Smart Series Battery Charger 12V 15A 1 output IP22

The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
The battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Check the status of your battery remotely
The Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Specifications:
Model: 12/15 IP22 - 1 Output
Input voltage range: 180-265V AC / 45-65Hz
Charge voltage absorption: 12V Normal 14,4V, High 14,6V, Li-ion 14,2V
Charge voltage Float: 12V Normal 13,8V, High 13,8V, Li-ion 13,35V
Charge voltage Storage: 12V Normal 13,2V, High 13,8V, Li-ion 13,5V
Charge current: 15 A
Weight kg (lbs): 1.4 (3.1)
Size: 235x108x65 mm (9.2 x 4.2 x 2.6 inches)

n°1 - Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors

Cable kit made of black 6 mm² 5 meter photovoltaic cable, red 6 mm² 5 meter photovoltaic cable, MC4 female and male connectors. Specifically designed for the creation of quick and safe connections in the field of photovoltaic applications with the most common inverter and junction boxe. They are made with tinned copper contacts and PPO housing. Resistant to mechanical and climatic stress and resistant to UV rays. The cables and connectors are supplied pre-wired.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.